Photo I – Review Quiz

Multiple Choice

Which camera control should be adjusted to prevent movement when making a photograph?

An under-exposed negative appears _____________.

This controls the overall lightness and darkness of the image

The longer the focal length, the greater the _________________ of the image.

What area of the print do you examine first for proper exposure?

Unwanted light that reflects and scatters inside a lens or camera, causing a loss of contrast in the image as it reaches the film is called __________.

During development of your film, what will NOT increase the contrast of your negative?

This describes a film's sensitivity to light

What type of light meter does a 35mm camera have?

What criteria do you look for on a contact sheet to determine if it is properly exposed?

Which of the following has the greatest effect on film development?

The particles of silver that make up a photographic image are called __________.

Exposure changes (doubling or halving the exposure) are measured in

Your meter says f/11 at 1/60. An exposure that would provide TWO STOPS less exposure is ________________.

When hand holding a camera, what is the slowest shutter speed that can be used without getting camera shake?

If you take a reflected light meter reading of a white wall in a scene, and set the exposure on the camera as the meter indicates, what will the tone of the wall be in the final print? _________?

To prevent unwanted light from entering the lens, you should use a :

The amount of a scene that can be recorded by a particular lens from a given position is the ________________________.

What is the light sensitive part of film?

What standard rating indicates a film’s sensitivity to light?

Leave a Reply